Santa's Best 2407018UHO Instruction Manual download pdf

Fig 7a

LED14

ASSEMBLY INSTRUCTIONS:

No tools required (Hammer optional).

Retain carton for storage.

1. Carefully remove all parts from the carton. Your tree should

include the following (Fig 1):

1 collapsible tree stand

1 trunk with control box and plug

1 top branch tree section

1 49 function remote control

4 Lawn stakes

Replacement RGB LED bulbs, branch safety tips, light clips and

5 amp 125 volt fuse

ASSEMBLY OF TREE STAND:

1. Open the two sides of the hinged collapsible tree stand and

place on level ground in your desired display location (Fig 2).

Fig 1

Collapsible

tree stand

Replacement LED bulbs,

branch safety tips, light clips and

5 amp 125 volt fuse

Top branch tree section

Lawn stakes

Trunk with control box

and plug

49 function

remote control

6. Begin to gently guide the hinged branches downward to a

desired position, being careful not to cause injury from the

branch tips.

NOTE: The top 3 branches are not hinged; they must be

guided into a desired position.

8. To illuminate fully insert the plug into a working GFCI outlet or

an outdoor rated extension cord.

9. Push or gently hammer support stakes into the ground

securing the tree base. Angle each stake 45 degrees toward

the center of the tree (Fig 9).

NOTE: Check the item for any loose, unlit or damaged bulbs.

Although it will still operate, the bulbs must be replaced

promptly to ensure the performance and life expectancy of

the item. Also check that the support chains are not tangles

and the lights are hooked onto the frame.

Fig 9

Fig 2

2. Insert the hooks from the 4 swing arms (located on the trunk)

into the eyelets located on the tree’s base (Fig 4).

ASSEMBLY OF THE TREE:

1. Insert the tree’s trunk into the tree’s

base (Fig 3).

Fig 3

Fig 4

7. Proceed to now shape the

tree. The main branches,

along with the branch tips,

are flexible, and should be

spread open to mirror that of

a real bare branched tree (Fig

8).

Fig 8

You have completed the

assembly of the tree (Fig 10).

Fig 10

NOTE: Proceed to take the

loose string of lights, located

at the top of the tree’s trunk,

and begin wrapping and

clipping the light string to the

open unlit area where the top

branched tree section and

the tree’s trunk were joined

(Fig 7b).

Fig 7b

3. Lift the complete top

branched tree section and

insert into the top of the

tree’s trunk. Align and

position the base of the tree’s

top section into the “V”

opening on the top of the

tree’s trunk (Fig 5).

4. Insert the hooks from the 2

swing arms (located at the

base of the top branched tree

section) into the eyelets

located on the tree’s trunk

(Fig 6).

5. Make the lone male to female

coaxial connection of the top

branched tree section to the

tree’s trunk (Fig 7a).

Fig 5

Fig 6

REMOTE CONTROL OPERATION

Included is your remote control that operates the color and

function of your deciduous tree.

Before operation; a standard 9 volt type battery (6F22, 6LR61 or

23F6-220) must be installed into the remote control; by simply

removing the slide plate located on the back of the remote control.

NOTE: For additional remote control range extend the remote

control antenna.

The tree’s 49 function lighting capability is controlled solely by

the use of the remote control provided.

NOTE: When the tree is turned off by the use of the remote

control; and is then turned back on by the use of the remote

control; the tree will resume the memory of the last lighting

function which was selected on the remote control.

This product was pre-tested before shipment and date coded.

In keeping with the National Electric Code, this product is

intended for seasonal (90 days max.) installation and use. The

2 year limited warranty covers repair or replacement of this

product if it fails to light. This product is covered under

warranty only if it is used as intended for 2 holiday seasons (90

days max. per season). If product fails to light, call Home Depot

customer service toll-free at 1-877-527-0313. This warranty is

void if the product is misused or damaged in any way.

2 YEAR LIMITED WARRANTY

2. If failure to light persists the fuse may need to be replaced.

This product employs an overload protection fuse. A blown

fuse indicates an overload or short-circuit situation. If the

fuse blows, unplug the product from the outlet. Also

unplug any additional strings or products that may be

attached to the product. Replace the fuse as per the

following instructions (follow product marketing for proper

fuse rating). If the replacement fuse blows, a short-circuit

may be present and the product should be discarded.

(a) Before changing fuse, make sure set is unplugged.

(b) Grasp plug and remove from the receptacle or other

outlet device. Do not unplug by pulling on cord.

(d) Remove fuse carefully.

(e) Risk of fire. Replace fuse only with 5 amp, 125 volt fuse

(provided with product).

(f) Close fuse cover. Make sure door is fully closed and the

fuse is completely covered.

(g) Risk of Fire. Do not replace attachment plug. Contains a

safety device (fuse) that should not be removed. Discard

product if the attachment plug is damaged.

3. A delayed response, while switching between color

selections on the remote control, is in no way a

malfunction of the light set, but is a normal operating

response due to the complexity of the technology.

All bulbs must independently receive their signal to alter

to the correct color selected. Some bulbs receive their

signals quicker than others, hence a delayed receiver

response may occur. Again, this is a normal response

based on the technology.

4. Bulb(s) fail to receive it’s signal and therefore does not

follow the color sequence selected on the remote control:

(a) Identify and mark the bulb(s) and then push the “test”

button which is located on the remote control.

(b) Once the test button has been depressed, the entire

tree’s lights will then switch from its current color

selection and convert to a 6 color multi light set.

replacement bulb with the color it is now indicating when

the test button was pushed.

(d) Once the bulb(s) have been replaced as indicated; proceed

to turn the tree to the off position by the remote control.

(e) Proceed to now turn the tree back to the on position.

(f) The color sequence signal to the bulb(s) has now been

corrected and is now in sync.

5. When turning the tree off, by the use of the remote

control, the tree may remain in a stand-by mode; causing

a bulb(s) to remain actively lit.

6. This RGB LED voltage technology allows for no

overheating to occur when the bulb(s) remains lit and

therefore, this will have no ill effect on the longevity or

safety of the light set and tree.

1. If the tree does not illuminate press the on/off button on your

remote control. If failure to light persists the battery may need to

be replaced. Insert a standard 9 volt type battery (6F22, 6LR61 or

23F6-220); aligning the appropriate ( +/- ) markings accordingly.

NOTE: By extending the remote antenna, pressing the

remote function button and changing the remote angle

slightly you may achieve better remote control reception.

If the tree fails to light due to a damaged or defective

remote control; a new remote control can be provided

through our customer service center.

TROUBLESHOOTING

1. Leave assembled if storage room permits or disassemble,

placing all components in the original carton.

2. Store in cool, dry location away from sunlight.

NOTE: Store your remote control in a SAFE & DRY location

and remove the battery from remote control before storage.

STORAGE INSTRUCTIONS

Please follow the instructions below in order to effectively

assemble and disassemble your tree.

In the event that you should encounter any issues during the assembly

of your tree; please refer to the “Troubleshooting” portion of this

manual or call our toll free customer service number at 1-877-527-0313,

and a trained representative will assist you.

OUTDOOR RGB DECIDUOUS TREE SCULPTURE

Made in China Printed in China

This is not a toy, for decorative use only.

Distributed by Santa’s Best®

Riverwoods, IL 60015 USA

www.santasbest.com

Fig 11

15”

2014 Home Depot US

6ft Outdoor RGB Deciduous Tree Sculpture Instruction Sheet (English)

Date: 5/23/14

Item # 2407018UHO

13”

1 2

Summary of Contents

Page 1

Fig 7aLED14ASSEMBLY INSTRUCTIONS:No tools required (Hammer optional).Retain carton for storage.1. Carefully remove all parts from the carton. Your tre

Page 2

LED14INSTRUCCIONES PARA ENSAMBLAJE:No se requieren herramientas.Conserve el embalaje para el almacenamiento.1. Quite cuidadosamente todas las piezas d

Comments to this Manuals

No comments

Santa's Best 2407018UHO Instruction Manual

Browse online or download Instruction Manual for Unknown Santa's Best 2407018UHO. Santa's Best 2407018UHO Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals